Products

  • CJX2-F Series AC Contactor

    CJX2-F Series AC Contactor

    Application

    CJX2-F series AC contactor is suitable for AC 50/60Hz. Rated voltage to 1000V. Rated current 115-800A in the circuit, for long-distance breaking current and frequent
    Used to start or control the motor. It is also used to control power distribution circuits with a rated current of 200-1600A.

  • DZS8(3RV) Motor protection circuit breaker

    DZS8(3RV) Motor protection circuit breaker

    Application

    DZS8(3RV) series circuit breakers are mainly used for the overload, short-circuit and phase -failure protection for motors in the circuit of AC50/60Hz, rated operating voltage up to 660V, rated operating current from 0.11A to 25A. They can be also used for circuit protection in the circuit of 0.11A-25A.

  • Load isolation switch

    Load isolation switch

    Product description

    Modular design structure, flexible and diverse combination, using glass fiber reinforced unsaturated polyester resin to make the shell, with high dielectric performance, protection ability and reliable operation safety.

    The operating mechanism is an accelerating mechanism with spring energy storage and instantaneous release, which instantaneously connects and breaks the double-breakpoint contact structure. It has nothing to do with the speed of the operating handle, which greatly improves the electrical and mechanical properties.

    A variety of structures and operation methods, there are windows for directly observing the on-off state of the contacts, operations inside and outside the cabinet, front and side operations, and back-to-board wiring.

  • DD862/DT862 Single Phase Watt-hour Meter

    DD862/DT862 Single Phase Watt-hour Meter

    Application

    Three phase meter consists of two kinds: Active and Reactive, which are induction ones to measurethree phase current at rated frequency (50Hz), And they are installed indoor.

    Ambient temperature: -10″C~50″C, first grade and second grade are exceptional,

    Relative humidity: below 80% (23 “C). 80~130A Ac Contactor

  • Cutout Fuse Insulator Arrester

    Cutout Fuse Insulator Arrester

    cutout fuse insulator arrester

     

    Apecification

    微信图片_20210803104757 微信图片_20210803104803

  • Cutout Fuse Insulator Arrester

    Cutout Fuse Insulator Arrester

    Application

    The primary purpose of any Cut-out Fuse is to provide protection to the lines of your system and the various apparatus on those lines such as transformers and capacitor banks. Cutout fuse provide reliable protection from low-level overloads that just melt the fuse link, intermediate faults, and very high faults, through maximum interrupting capacity.

  • Cutout Fuse Insulator Arrester

    Cutout Fuse Insulator Arrester

    Features:  -Reliability and excellent protection based on years of experience and expertise in surge protection. -Good anti-moisture capability, resistant to pollution. -Long life and lightweight. -Easy installation and maintenance. -High energy absorption ability. Technical Data: Type MOA Rated voltage  MOCV 1/10 μS Steep Current impulse 8/10μS lightning current impulse 30/60μS switching current impulse 2 μS Rectangular Current impulse 4/10μS High Current impulse kV(r.m.s) kV A kA YH5...
  • Cutout Fuse 20 to 400A

    Cutout Fuse 20 to 400A

    description  

    Designed for IP43 rating and performance compliance with BS7656:1993.

  • DZM0(PKZM0)  0.1A to 25A Motor Protective Circuit Breaker

    DZM0(PKZM0) 0.1A to 25A Motor Protective Circuit Breaker

    Application

    DZM0(PKZM0) Motor Protective Circuit Breaker is applicable for the circuit of AC 50/60Hz, rated insulation voltage 750V, reted operating voltage up to 660V, rated operating current from 0.1A to 25A. It is used for protecting the motor against overload,short-circuit and phase- failure,lt can be also used for starting and breaking the stater of motor and for the circuit protection in the circuit of 25A.

  • LR2-F Series 80~130A Ac Contactor

    LR2-F Series 80~130A Ac Contactor

    Application

    LR2-F Thermal Overload Relay is applicable to protect overload and open-phase of long-time continuo us or discontinuo us working AC motor in the circuit of AC50/60Hz ,current up to 630A, voltage up to 690V.it has features of temperature compensation. action indication, manual and automatic restoration.

  • DZM0(PKZM0)  0.1A to 25A Motor Protective Circuit Breaker

    DZM0(PKZM0) 0.1A to 25A Motor Protective Circuit Breaker

    Fuse base

    Description

    Used for cutting and connection protection, installed in counting box,

       ♦ Made of self- -peelable synthetic material.

       ♦ Secured by a M5 stainless steel screw.

       ♦ Mountable core 22 * 58 specifications

         Mountable core    4 to100A

     

  • DZS8(3RV)  circuit breakers

    DZS8(3RV) circuit breakers

     

    Application

    DZS8(3RV) series circuit breakers are mainly used for the overload, short-circuit and phase -failure protection for motors in the circuit of AC 50/60Hz, rated operating voltage up to 660V, rated operating current from 0. 11A to 25A. They can be also used for circuit protection in the circuit of 0.11A-25A.